TeraTerm Support Forums • View topic

POWERSOFT · **Joined:** Mon Jun 11, 2012 5:50 am **Posts:** 2

Hello,

I wont to use TT as a input for my amForth.

When I send line with commands ended with a cr/lf TT should wait to send a new line
until it receives "ok" from amForth.

Can this been done with a macro or something else?

Thanks for any help.

Jan Kromhout
Hellevoetsluis-NL

dpena · **Joined:** Thu Jul 09, 2009 2:14 pm **Posts:** 122

Hi,

Try this
http://ttssh2.sourceforge.jp/manual/en/ ... /wait.html

Example:

Select all

 
;Be sure to set your timeout
 
timeout = 60 ; time in seconds
 
sendln 'show ok message'
wait 'ok'
if (result = 0) goto fail ;This means the "ok" prompt was not seen in the 60second timeout limit.
if (result = 1) goto pass ;This means the "ok" prompt was seen within the 60 second timeout limit.
 
end
;------------------------------------------------
:fail
  messagebox 'No "ok" message seen' 'User Message'
end
;------------------------------------------------
:pass
  messagebox '"ok" message seen' 'User Message'
end
 
 
 
 
 

POWERSOFT · **Joined:** Mon Jun 11, 2012 5:50 am **Posts:** 2

hi,

thanks for it, where to store this code, and how activate it?

cheers,

jan

Who is online